Electronics in mechanical engineering: the leaders smart machines need now

Electronics in mechanical engineering: open control unit with sensors next to a welded metal part

On 20 January 2027, the EU Machinery Regulation replaces the old Machinery Directive. From that day, software that performs a safety function and is placed on the market on its own counts as a safety component. And anyone who builds a machine has to show in the technical documentation that its control system and software are protected against tampering.

In brief: The new regulation turns electronics in mechanical engineering into a leadership task, because the manufacturer is responsible for control systems and software. This creates roles that barely existed ten years ago: head of embedded development, product cybersecurity, sensor technology and digital services. These profiles are scarce in Munich and Ulm too. If you need to fill them, start now and include the UK and the US in your search.

Contents

What changes for machine builders on 20 January 2027?

Regulation (EU) 2023/1230 on machinery entered into force on 19 July 2023, and a transition period has been running since then. Unlike the previous Directive 2006/42/EC, the regulation does not need to be transposed into German law; it applies directly in all EU member states. That leaves one date that matters for your company: machines may be placed on the market under the old directive until 19 January 2027, and from 20 January 2027 only the new regulation applies.

The most important changes concern exactly the part of the machine that many mid-sized manufacturers have so far bought in:

  • Software with a safety function that is placed on the market as a standalone product counts as a safety component.
  • Annex III, point 1.1.9 requires protection against corruption: hardware, software and access points that matter for safety or conformity must be secured against unauthorised interference. The evidence belongs in the technical documentation.
  • For the first time, there are explicit rules for safety functions that rely on self-learning, AI-based systems.
  • Instructions for use may now be supplied in digital form.

Running in parallel is the Cyber Resilience Act (CRA), the EU regulation on cybersecurity for products with digital elements. It entered into force on 10 December 2024. Since 11 September 2026, manufacturers have had to report actively exploited vulnerabilities, and the remaining obligations apply from 11 December 2027. For a connected machine, that means three deadlines within 15 months.

Part of this can be handled with consultants, testing bodies and templates. One question stays in-house, though: who in your company understands the control system well enough to take responsibility for it? If the honest answer is "our supplier", you have a staffing issue.

Why is more of a machine's value created in electronics and software?

German mechanical engineering has been in a long slump. VDMA economists expect real output to fall by 2 per cent in 2026. In a shrinking market, the winner is rarely the company that welds the sturdier frame. It is more likely to be the one that makes the machine smarter: it measures its own condition, reports wear before it causes downtime and can be serviced remotely.

PwC's Global Industrial Manufacturing Sector Outlook from March 2026 shows that this is where companies want to go. It surveyed more than 400 executives worldwide, including 50 from Germany. They expect to generate around 44 per cent of their revenue outside the traditional manufacturing of industrial goods by 2030, in other words from services, software and data-based offerings. PwC rates only 14 per cent of German companies as well prepared for the future, compared with 20 per cent worldwide.

We have described how concretely this affects orders using the example of data centres. In cooling, power distribution and heat recovery, sensors and control systems win the contract, while the housing is interchangeable (more on this in our article Data centres and mechanical engineering: the leaders the boom needs). The same now applies to machine tools, packaging lines and printing presses. And it pulls along industries that rarely get attention: makers of sensors, drives and industrial PCs, software houses for machine control, and functional safety service providers.

Our position is clear: in a mid-sized machine builder, the electronics and software leadership now decides margins and customer loyalty at least as much as mechanical design does. A company that leaves this role vacant or delegates it to a supplier gives away the most valuable part of its machine.

Which leadership roles are becoming scarce?

Behind the sentence "We need more electronics expertise" there are usually a few very specific positions:

Role Responsibility Where candidates often work today
Head of Electronics and Embedded Development Control platform, electronics hardware and embedded software, i.e. software that runs directly on control units Automotive suppliers, automation technology, medical technology
Head of Product Cybersecurity Protection against tampering, vulnerability management, CRA reporting IT security with OT experience (OT stands for operational technology, the control and plant systems in production)
Head of Functional Safety and Compliance Risk assessment, CE conformity under the new regulation, release of safety-related software Testing bodies, special-purpose machinery, rail and vehicle technology
Head of Sensor Technology and Digital Services Condition monitoring, remote maintenance, data-based service models Sensor and automation manufacturers, industrial software
Technical Managing Director / CTO Overall responsibility for mechanics, electronics and software Heads of development at competitors and suppliers

The figures show why these searches are hard. The VDI/IW Engineering Monitor for the third quarter of 2026 counts 65,427 unemployed people in engineering and IT occupations, more than at any time since the survey began in 2011. At the same time, energy and electrical engineering still has 238 vacancies for every 100 unemployed people. In mechanical and automotive engineering the figure is 174, in IT 117 (VDI/IW Engineering Monitor Q3 2026). So more unemployment does not mean the right people are available. Someone who lost their job when a supplier ran into trouble rarely brings the combination of electronics, safety standards and leadership experience that one of these roles requires.

In the long term it gets tighter. According to an analysis published by the VDE in May 2026 (in German), around 30,000 more electrical engineers will retire by 2029 than universities will produce. In 2027, 13,100 retirements will be set against only 6,523 graduates in electrical engineering and information technology. For mechanical engineering as a whole, an IW study commissioned by the Impuls-Stiftung expects around 296,000 employees to retire by 2034, with only about 118,000 coming in to replace them.

What does this mean for the Munich and Ulm labour markets?

Almost one in three vacancies in engineering and IT occupations in Germany is in Bavaria or Baden-Württemberg. In the third quarter of 2026, Bavaria had 18,600 open positions in these occupations and Baden-Württemberg 14,030. In both states, unemployment in these occupations also rose markedly, by 16.8 per cent in Bavaria and 20.6 per cent in Baden-Württemberg. For your search, this means there is movement, but mostly among profiles you do not need for a head of embedded development.

In Munich, mid-sized machine builders compete for electronics leaders with large employers from electronics, the automotive industry and aerospace. Candidates have options, and they compare salary bands with those of large corporations. A mid-sized company rarely wins here on base salary. It wins on scope: short decision paths, a product you are responsible for as a whole, and the chance to build an electronics department from scratch. You can find more about the location on our page on executive search in Munich.

In Ulm and eastern Württemberg, the market is smaller and even tighter. IHK Ulm reports that its region has the lowest unemployment rate of any chamber of commerce district in Germany, most recently 3.4 per cent. Electronics and sensor specialists here often work for automotive suppliers, commercial vehicle manufacturers, medical technology companies or defence electronics firms. People in good positions rarely respond to job ads. They move when someone approaches them personally with a role that is better than the one they have. We describe how this works in the region on our page on executive search in Ulm.

An example from our consulting practice, anonymised and for illustration only: A special-purpose machine builder in eastern Württemberg with around 300 employees was looking for a head of electronics development. Until then, an external service provider had supplied the control systems, and integration was handled in-house by a long-serving electrical designer who is due to retire in two years. The first job advertisement mainly attracted applications from mechanical designers without software or safety experience. The right person was eventually found through direct approach at an automotive supplier in the Munich area. The deciding factor was not the salary but the offer to build the control platform personally and get a dedicated team for it.

When is it worth searching in the UK or the US?

In two situations, a search abroad is the better choice. First, when the German-speaking market for a profile is clearly exhausted after a few weeks, for example product cybersecurity with control systems experience. Second, when the role itself is international, such as building up service and sales in North America.

If your development team already documents in English and works with international customers, searching in the UK widens the candidate pool considerably. Since Brexit, however, British nationals need a residence permit to work in Germany. For executives, the EU Blue Card is usually the simplest route. In 2026, the salary threshold is €50,700 gross per year, or €45,934.20 for shortage occupations, which include engineers. For leadership positions, the threshold is rarely the obstacle. But plan time for the visa, relocation and notice periods.

In the US, the question usually runs the other way. According to the VDMA, German machinery deliveries to the US fell by 8 per cent to around €25 billion in 2025, weighed down by tariffs on steel and aluminium content. According to the association, smaller machine builders are responding mainly by expanding their service networks in the US. That creates demand for local leaders who understand control technology and remote maintenance and can work with a German parent company. You will only find such people with partners who know the American market and its salary levels.

What to clarify before January

Check these points before 20 January 2027:

  • Who signs your declaration of conformity, and can that person assess the control software technically?
  • Do you have a defined process for identifying vulnerabilities and reporting them under the CRA? The reporting obligation already applies.
  • Does your electronics know-how depend on a single person who will retire in the next few years?
  • Is the planned position designed as a real leadership role with a budget and a team, or as a staff function without decision-making authority? Strong candidates notice the difference in the first interview.
  • Does your salary band match what electronics leaders earn at suppliers and large corporations?
  • Have you considered whether the role could also be filled by someone from the UK or the US, including language and travel requirements?

If you answer no to several of these questions, start with the staffing question. The documentation can be completed later; the right leader cannot be found in four weeks.

Frequently asked questions about electronics in mechanical engineering

When does the new EU Machinery Regulation apply?

Regulation (EU) 2023/1230 has been in force since 19 July 2023 and becomes mandatory on 20 January 2027. It does not need to be transposed into national law. Until 19 January 2027, machines can still be placed on the market under Machinery Directive 2006/42/EC.

Does the Cyber Resilience Act also apply to machines?

Yes, if the machine contains digital elements such as a networked control system. The reporting obligations for actively exploited vulnerabilities have applied since 11 September 2026, and the remaining requirements apply from 11 December 2027.

What experience does a head of embedded development in mechanical engineering need?

Usually a degree in electrical engineering, computer science or mechatronics, several years developing control systems or control units, knowledge of functional safety and experience leading mixed teams of hardware and software developers. Industry experience in mechanical engineering helps but is often not essential.

Can British professionals simply work in Germany?

No. Since Brexit, they need a residence permit. The EU Blue Card is the obvious option for highly qualified people. In 2026, the salary threshold is €50,700 gross per year, or €45,934.20 for shortage occupations such as engineering.

Let's talk about your next key position

Do you want to fill the head of your electronics, embedded or safety development before the new Machinery Regulation takes effect? Schlagheck + Radtke works as a headhunter for mechanical and plant engineering, with offices in Munich, Ulm and Düsseldorf, and approaches candidates discreetly and personally. For searches in the UK, the US and other countries, we work within the international PRAXI ALLIANCE network, of which we are a founding member. Get in touch and we will be happy to discuss your position without obligation.